MFJ9A-YC SERIES AC(JUNCTION BOX TYPE) WET-VALVE SOLENOID Porpose This series solenoid is applied to the control circuits of AC 50HZ/60HZ,which voltage can rach 380V,as a power component of the hydraulic solenoids dirctional valve.It can be used in Ng6 Ng10 of YUKEN solenoid directional valve,which is junction box screw connected.
Usual Service Conditions It can be installed randomly. There is no gas or dust which can corrupt metal or destroy nonconductor.or,it will affect the products lifetime. The solenoids fit for the character of service as followe:disconnected continuous duty system,intermittent recycled duty system. The reasonable wave rqnge of supply voltage is betweent 85%-110%(any special requirements is possible). The protection is IP65 class.
Key Parameters
Code |
Rated Voltage£¨V£© |
Rated Force£¨Hz£© |
Rated Force£¨N£© |
Rated Stroke(mm) |
Total Stroke (mm) |
Static Oil Pressure (MPa) |
Start VA |
Holding VA |
|
MFJ9A-26YC |
110/220 220/240 |
50/60 |
¡Ý26 |
3 |
¡Ý6 |
16 |
¡Ü188 |
¡Ü60 |
12000 |
100 200 |
60 |
MFJ9A-50YC |
110/220 220/240 |
50/60 |
¡Ý50 |
4 |
¡Ý8 |
16 |
¡Ü336 |
¡Ü84 |
12000 |
100 200 |
60 |
Purchase Code
Vatve-using Solenoids |
AC |
Design Code |
Rated Force (N) |
Wet |
MF |
J |
9A |
26/50 |
YC |
Externality&Installation Dimensions
Operating Notice Mode connection of solenoids is junction box.Thevoltage of junction box must meet whit the solenoid itself. The pushpin of the solenoid is used in adjustment or some times in emergency,but when the backpressure of the system is higher,please use screwdriver to push it,not stride it.The wallop can destroy the pushpin and the surface of the leading hold,orthe solenoid will leak oil or cannot prqosition. When solenoid is used in double directions,remember the solenoids cannot be energized at the same time in order to prevent the solenoids form burning. There is a protector of over-current between electrical control systems and solenoids,in order to prevent the solenoids and the electrical component form buming in improderly conditions.
Explantion Of Sample If client have special requirements,we can dajust the connect dimension,the extended length of push pin,and the supply voltage between solenoids and valve body. Characteristic curve for reference only. The main perfonance parameter is obtained in the conditions of lab.Finally explanation and changing of the paramters by HUAXING.
|
|