MQ2 SERIES AC PULLING SOLENOID



MQ2 SERIES AC PULLING SOLENOID
Porpose
This series solenoid is applied to AC 50HZ,which voltage can rach 380V,It can be used as a power component of machine equipment and the automatic system to realise the thlecontrol of the various outfits and the michanical trig.

Usual Service Conditions
It can be installed randomly.
There is no gas or dust which can corrupt metal or destroy nonconductor.or,it will affect the products lifetime.
The solenoids fit for the character of service as followe:disconnected continuous duty system,intermittent recycled duty system.
The reasonable wave rqnge of supply voltage is betweent 85%-110%(any special requirements is possible).

Key Parameters
Code
Rated Voltage（V）
Rated Force （N）
Rated Stroke (mm)
Operating Frequency(T/h)
Start VA
Holding VA
MQ2-0.7
110 220 380
7
10
600
102
16
MQ2-1.5N
110 220 380
15
20
200
503
49
MQ2-1.5Z
MQ2-3N
110 220 380
30
25
200
820
68
MQ2-3Z
MQ2-5N
110 220 380
50
25
200
1830
99
MQ2-5Z
MQ2-8N
110 220 380
80
25
200
1900
110
MQ2-8Z
MQ2-15N
110 220 380
150
50
200
8560
342
MQ2-25N
110 220 380
250
30
200
10120
437


Purchase Code
Pulling Solenoid
Design Code
Rated Force(Kgf)
Push Type
Push Type
MQ
2
0.7/1.5/3/5/8/15/25
Z
N


Externality&Installation Dimensions

Code
External Dimensions
Installation Dimensions
Mounting Hole
Push Pin
Related Size
Armature g
A
B
H
A1
B1
a
b
d
h
D
R
V
T
MQ2-0.7
43
50
65
30
35
8
6
φ5.5
9
φ3.5
5
3
6
90
MQ2-1.5Z
63
60
92
50
38
6.5
4.5
φ4.5
11
-
-
-
-
190
MQ2-3Z
63
70
97
50
48
6.5
4.5
φ4.5
11
-
-
-
-
270
MQ2-5Z
80
77
116
60
50
8
6
φ6.5
17
-
-
-
-
420
MQ2-8Z
80
87
116
60
60
8
6
φ6.5
17
-
-
-
-
530


Usual Service Conditions
The solenoid is installed to the valve perpendicularly.(When the armature moves up,the force of the soleniod includes the weight fo the armature.)
The direction of the soleniod counter-force must be surperposed to the center line of the armature.
When the solenoids of the soleniod counter-force must be surperposed to the center line of the armature.
When the solenoid counter-force must be surperposed to the center line of the armature.
When the solenoids have used for a long time,they may produce noise and can not be stroked,you can disassemble the solenoids,cleaning the oil stain and the dirtiness form the pole of armature in order to avoid the coil from burning.